$25.95
In stock
Retain your brake light functionality with rear brake with this hydraulic brake pressure switch with 1.00 thread pitch. Fits nearly every Japanese bike. Simply unscrew the banjo bolt in the top of the master cylinder and thread the switch in; then connect wires accordingly.
| Weight | 0.60 lbs |
|---|---|
| Dimensions | 14.00 × 12.00 × 4.00 in |
Use this to plug your speedometer drive gear when removing the cable for installation of an aftermarket speedometer or computer. Since the drive contains the spacer, you’ll need to keep the drive installed or use very expensive custom aftermarket spacers. These inexpensive plugs will let you seal the grease in and dirt/water out using the OEM retaining screw. Simply install the same as you woul…
Reviews
There are no reviews yet.